Convert your refridgerator into a draft system with this kit. For use with commercial style American Sanke Kegs. Comes complete with 5 lb. (empty) co2 tank, double guage regulator, Sanke universal tap, door shank, faucet & Handle, all tubing and fittings.
|
Large foam washer used to seal the door shank or co2 line shank when the shank is run through the fridge.
|
1/8 to 1/2 inch stainless steel hoseclamps. Works well on tubing up to 5/16. Works great on wort chillers or draft systems, the clamps will no trust!
|
Nut used on the tail end of the door shank when installing your beer line to it. Nut only! You may need the tailpiece and washer.
|
Black handled tap that fits into the top of the American Sanke kegs to run co2 in and liquid out of keg. The whole tap twists to lock into place and the handle locks down for dispensing the beer.
|
Metal wrench with a plastic handle used to tighten or loosen the chrome faucet when installed on a tower or on a door shank.
|
Use to go through the refridgerator door with a chrome faucet and a tailpiece, to dispense your beer without opening the fridge.
|
Black plastic 3 tall faucet handle that screws onto the chrome faucet for dispensing.
|
1/4 to 1 stainless steel clamps.Works well on larger tubing for draftsystems. Will not rust!
|
Plastic picnic type faucet with 1/4 inch barbs on tail end for use with 1/4 inch i.d. tubing in draft systems. Has thumb lever for dispensing.
|
CO2 regulator that screws on to the co2 tank and regulates the amount of co2 used to carbonate or dispense the beer. It has a guage to monitor the co2 left in the tank and another to monitor the co2 flow into the keg. It has a manual adjustment for changi
|
(EMPTY) cannot ship filled
|
Chrome outside faucet with a smooth bore inside to help prevent foaming. Use with the door shank to convert a refridgerator into a draft system, or faucet will work with any faucet tower.
|
1/4 inch threaded nut with a 1/4 inch barbed fitting for tubing.
| |