|
|
Racking Equipment
Finally an easy way to siphon!
|
Used to hold the racking tube in any size glass container from carboys to half gallon jugs. The racking tube fits into a slot in the side of the holder and allows you to adjust the racking tube depth while siphoning.
|
1/4 inner diameter clear tubing used mainly on draft systems.
|
3/8 inner diameter clear tubing, used for siphoning, draft systems, bottling or any other use.
|
White plastic click clamp that slides over your 1/4 or 3/8 tubing to slow or shut off the flow going through the tubing.
|
Plastic clip that clips on to the top of your fermenting bucket and holds your rigid racking tube in place so you can rack from the top of the fermenter down to the sediment. This way you pull less sediment into your secondary fermenter.
|
Black plastic spring clip that clamps on top of your carboy and holds your rigid plastic racking tube so you can siphon from the top of the fermenter down to the sediment so you don't tranfer the sediment to the secondary fermenter.
|
Hard plastic tubing used to siphon from one fermenter to the next. Curved on one end to install 3/8 tubing and it has a sediment cap on the other end to hold it above the yeast sediment.
| |
|
|
|